Use this information to learn about diagnostic tests that
are performed by Dynamic System Analysis.
The Portable Edition of
Dynamic System Analysis performs
the following diagnostic tests on devices that are available in the
target system:
- Optical drive tests: Includes media verification and read
error test.
- Tape drive tests: Includes tape presence, tape alert, tape
load and tape self test.
The Preboot Edition of
Dynamic System Analysis performs
the following diagnostic tests on devices that are available in the
target system:
- Optical drive tests: Includes media verification and read
error test.
- Tape drive tests: Includes tape presence, tape alert, tape
load and tape self test.
- CPU stress test
- Broadcom network test which includes:
- MAC registers
- PHY register
- NVRAM
- internal memory
- interrupt
- MAC loopback
- PHY loopback
- LED
- Intel network test which includes:
- EEPROM
- FIFO
- Adapter registers
- Memory tests including:
- Memory stress test
- Isolation memory test
- Hard Drive self test
- System management test including:
- RSA restart
- BMC/IMM I2C test
- Checkpoint panel test
- Brocade tests including:
- MemoryTest
- External Loopback
- Serdes LoopBack
- PCI Loopback
- External Ethernet Loopback
- Serdes Ethernet Loopback