Use this information to learn about the types of system
information that is collected by Dynamic System Analysis.
Dynamic System Analysis collects the following information for supported systems:
Software- System overview
- Computer system information, such as manufacturer and serial number
- Operating system, such as type, version, and fix level
- Time zone
- Current user
- Critical details, such as high priority error conditions
- Data source, such as information about Dynamic System Analysis
- Installed software packages
- Kernel modules (Linux only)
- Installed hot fixes (Windows only)
- Installed device drivers, such as device drivers and rollback
drivers (Windows only)
- System services (Windows only)
- Windows components (Windows only)
- Network settings
- Global settings, such as host name and domain name
- Route information, such as gateway and destination address
- Virtual teams
- Virtual network ports, such as MAC addresses and IP addresses
- Physical network ports, such as MAC addresses and IP addresses
- Resource utilization
- Memory usage, such as memory load, total virtual size, and free
virtual size
- Performance data
- Processes, such as handle, name, and run state
- Operating system configuration
- Boot configuration
- Init configuration (Linux only)
- Kernel module configuration
- Kernel ring buffer (Linux and VMWare only)
- Active user information (Windows only)
- User environment variables
- System environment variables
- Paging file (Windows only)
- Linux configuration files
Hardware- Hardware inventory
- Processor and coprocessor
- Memory
- Disk information
- Volume and mount points
- Video controller,
- Monitor
- System card information
- System devices (Windows only)
- SCSI devices
- SATA/IDE devices
- USB bus devices
- USB hubs
- USB devices
- Optical devices
- EXA ports
- Other devices
- PCI information
- Firmware and VPD
- Firmware
- Emulex firmware
- NIOS (or UEIF)
- Diagnostic VPD
- SP firmware main VPD
- SP firmware BootROM VPD
- SP firmware, such as BMC, H8, RSA, iMM
- Other VPD
- SP and IMM configuration
- Dial and login settings
- TCP/IP properties
- Environmentals
- Drive health
- ATA devices
- SMART attributes data
- SMART status
- SMART error log
- Commands that precede the error
- SCSI sense data (Multitools only)
- LSI IR controller
- Controller configuration
- Logic information
- Physical information
- Enclosure information
- LSI IDE controller
- Controller configuration
- Logic information
- Physical information
- MegaRAID Controller
- ServeRAID Controller
- PMC RAID Controller
- Light path
- BIST Results
- ISMP BIST results
- RSA BIST results
- ASMP BIST results
- IPMI BIST results
- Emulex
- Brocade Adapter
- QLogic Fibre Channel Controller (Multitools only)
- QLogic iSCSI Controller (Multitools only)
- System BIOS information
- Embedded hypervisor information
Logs- Event logs
- SP/IMM Logs
- ASM event log
- ISMP event log
- IPMI event log
- Chassis event log
- EXA Chipset registers (Multitools only)
- Analysis logs
- Merged log
- Merged devices
- UpdateXpress
- Diagnostics and memory diagnostic
- File loader results
- DSA error log