These environment variables are used by Dynamic System Analysis:
- DSA_INCLUDE
- Specifies one or more plug-ins that
are to be included when collectall is run. Separate
the plug-ins by a space, comma, or semicolon. Use the base plug-in
name (for example, Ddinfo; installedapps).
Tip:
- The plug-in names are displayed when collection occurs.
- The DSA_INCLUDE and DSA_EXCLUDE variables are mutually exclusive.
- To reset the effect of the environmental variables, set empty
values to the variables (for example, DSA_INCLUDE=).
Attention: Do not change this environment
variable. This variable is used for debugging and is intended for
use only by Lenovo technical support.
- DSA_EXCLUDE
- Specifies one or more plug-ins that
are to be excluded when collectall is run. Separate
the plug-ins by a space, comma, or semicolon. Use the base plug-in
name (for example, Ddinfo;installedapps).
Tips:
- The plug-in names are displayed when collection occurs.
- The DSA_INCLUDE and DSA_EXCLUDE variables are mutually exclusive.
- To reset the effect of the environmental variables, set empty
values to the variables (for example, DSA_INCLUDE=).
Attention: Do not change this environment
variable. This variable is used for debugging and is intended for
use only by Lenovo technical support.
- DSA_LOGLEVEL
- Indicates the level of detail requested
for logging. You can specify one of these values:
- 0: Error
- 1: Warning
- 2: Status
- 3: Debug
- 4: Verbose
Attention: Do not change this environment variable.
This variable is used for debugging and is intended for use only by
Lenovo technical support.
- DSA_LOGFILE
Specifies the path and file name
for the DSA event log.
Important:
- The path must exist on the local system on which DSA is running.
- If this variable is not defined, logging may be lost.
- DSA_EVENTLOG_MAX
- Specifies the maximum number
of entries collected from each system event log. The value must be
a positive integer with six or fewer digits. The default value is
5000.