The
Logical_Mode parameter
defines the policy to use when creating logical drives. Possible values
are:
- AUTO
- Indicates that defaults must be used for all parameters. Default
parameters are:
- One logical drive is created on each array using all available
space.
- The RAID level is set using the AUTO (default)
scheme.
- Write-cache mode is set by using the default value for the controller.
You can adjust these default values through the Logical_Defaults parameter.
- CUSTOM
- Indicates that you want to specify all of the parameters for each
logical drive that is created. If you specify CUSTOM,
you must specify the parameters for each logical drive by using the Logical.num parameter.