Removing server data and resetting RAID configuration

Use the Server Data Disposal and Reset RAID job to remove data from the drives and reset the RAID configuration of the target system.

1. Start the Altiris Deployment Solution console.
2. Navigate to the IBM Scripting Toolkit, Linux Edition 9.6 > Modular Deployment Tools > Step 1 - Pre-installation Hardware Configuration > Server Data Disposal folder.
3. Run the Server Data Disposal and Reset RAID job against the target system. You can customize the following variables for this job from the Altiris Deployment Solution console. The default values are shown.
   • TK_Wipe_Disk=1
   • TK_Wipe_Repeat_Number=00
   • TK_Wipe_Level=quick