The Logical_Mode parameter defines the logical-drive creation policy to use when creating logical drives.


Possible values for this parameter are:
Indicates that defaults should be used for all parameters. Default parameters are:
  • One logical drive is created on each array, using all available space.
  • The RAID level is set by using the AUTO (default) scheme.
  • Write-cache mode is set by using the default value for the controller.
You can adjust these default values by using the Logical_Defaults parameter.
Indicates that you want to specify all of the parameters for each logical drive that is created. If you specify CUSTOM, then you must specify the parameters for each logical drive by using the Logical.num parameter.


Logical_Mode = CUSTOM