The Logical_Mode parameter defines
the logical-drive creation policy to use when creating logical drives.
Description
Possible values for this parameter
are:
- AUTO
- Indicates that defaults should be used for all parameters. Default
parameters are:
- One logical drive is created on each array, using all available
space.
- The RAID level is set by using the AUTO (default) scheme.
- Write-cache mode is set by using the default value for the controller.
You can adjust these default values by using the Logical_Defaults parameter.
- CUSTOM
- Indicates that you want to specify all of the parameters for each
logical drive that is created. If you specify CUSTOM,
then you must specify the parameters for each logical drive by using
the Logical.num parameter.
Examples
Logical_Mode = CUSTOM