show command

Use the show command to view the current value of one or more settings.

show command syntax

OneCli.exe config show [command option] [--output<folder>][connection option]
Table 1. show command parameters
Parameter Required/Optional Notes
command option Optional
all
Default value.
Displays all of the supported settings.
group name
Displays the settings that belong to a group name.
setting name
The setting name value.
--output Optional

By default, the log file output is saved to: ../Onecli-%PID%-%date%-%time%/.
connection option Optional
--imm <user:pwd@ip>
Use for OOB.
Use for in-band, if you know the LAN over USB IP of the target IMM.
Use to specify the target IMM.
--node <x>
Use for inband cases on a multinode system.
Where x is a numeric value that indicates the node number. For example, if "--node 2" the target IMM is in the second node of a multinode system.
Note: Use only one connection option in a command line entry.

Example of the show command

OneCli.exe config show --imm USERID:PASSW0RD@10.240.252.102
This is the output generated from this example:
Lenovo ToolsCenterSuite CLI tcliXXX-X.X.X
Lenovo ToolsCenterSuite CLI tcliXXX-X.X.X
Based on module version X.X.X Licensed Materials - Property of Lenovo
(C) Copyright Lenovo Corp. 2013-2016 All Rights Reserved
Invoking SHOW command ...
Connected to IMM by IP address 10.240.252.102
IMM.Cert_CSR_Export_Format=DER
IMM.SSH_SERVER_KEY=Installed
IMM.PowerRestorePolicy=Restore
IMM.PSUOversubscriptionMode=NonRedundant With Throttling
IMM.AutoROMPromotion=Enabled

Memory.Sparing=Disable
Memory.MemorySpeed=Max Performance

Processors.PerCoreP-state=Disable
Processors.CoresinCPUPackage=All

LegacySupport.RehookINT19h=Disabled
LegacySupport.LegacyThunkSupport=Enabled

The SHOW command execute successful!