getinfor command

Use the getinfor command to generate device inventory information after using the getdevices command to obtain the device list. By default, the device list is output to the XML file.

getinfor command syntax

Onecli.exe inventory getinfor [--device <device name|all>] [--output <folder>] [--upload [ftp://username:password@ftphost/path/]] 
[--proxy userid:password@IP[:port]] [--htmlreport]
Table 1. getinfor command parameters
Parameter Required/Optional Notes
--device Optional
all
The default value.
Displays all of the supported settings.
system_overview, processes
Gets the complete list of supported devices.
--output Optional

  • By default, the log file output is saved to: ../Onecli-%PID%-%date%-%time%/.

  • The Onecli-inventory.zip file is saved to this folder. If the files already exists, they will be overwritten.
--upload Optional

  • If the server address is specified, then the output files are uploaded the specified server.

  • If not specified, there is no upload.
--proxy Optional Use proxy to connect to upload server.
Note: Both IPv4 and IPv6 addresses are supported. Enclose IPv6 addresses in brackets. For example, [FE80::3BA7:94FF:FE07:CBD0].
--htmlreport Optional Output contains HTML format.